• There is virtually no learning curve to getting into this meter and quickly mastering it's capabilities. Each parameter is fully supported by the on-screen contextual HELP function, which is active during measurement and calibration modes.


• 
  For field applications, Hanna's Quick Calibration allows the user to standardize pH, conductivity and dissolved oxygen, all with one solution! While in calibration mode, the meter will also assess and verify probe functionality.


• 
  For monitoring and recording data, HI 9828 can be equipped with the optional T.I.S. - Tag Identification System: iButton©s with unique ID numbers. Installed at any sampling site, these tags will record and match specific location information with logging data for water quality surveys.


• 
  Comprehensive GLP features, such as last calibration date and status information, calibration time-out, and date and time tags associated with sample measurements, ensure consistency and accountability.


• 
  The LOGGER function memorizes data from each connected sensors and log-on-demand & automatic logging can record up to 60,000 data samples. All data is downloadable to a PC via USB connectivity.


• 
  HI 9828 is designed for demanding outdoor environments. The meter is impact resistant and waterproof to IP67 standards (30 minutes immersion under 1 m of water), and the multi-sensor probe, HI 769828, with an IP68 rating, can be left underwater for an extended period of time. This intelligent probe contains a built-in microprocessor with amplifiers, interprets the high impedance signals from each sensor and sends the converted data to the water quality meter.


• 
  Five out of six measured parameters are housed in the probe: pH/pH mV, ORP, EC, % saturation and mg/L (ppm) oxygen and temperature. Each sensor is independently replaceable, and easy to maintain & clean. The sensors are protected by a rugged outer PVC/stainless steel sleeve, the design of which is suited for use in 2" wells. The intact probe housing is rated to IP68.

Optional GPS (Global Positioning System) Enabled

The new HI 9828 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m) so you can be sure that you return to the same location for repeated measurements.

Basic GPS Features

• GPS coordinates shown on the LCD with up to 10 measurement parameters
• GPS signal strength shown on LCD
• Number of satellites shown on LCD
• Logged data is embedded with GPS coordinates

Advanced GPS Features

• Users can associate GPS coordinates with alphanumeric locations
• Distances between current location and predefined locations are displayed arranged by distance
• Memorizes last location and time should signal be lost

Track Measurement Locations

Users can connect to GPS tracking software such as Google™Maps* to view locations where samples have been taken.

Measurement information is shown right on the map.